Catalog

Home

Catalog

Ordering & Shipping

Electrical Tech

Work Shop Tips

About M.A.D.

NYLON TIES
(black, UV resistant–they don’t become brittle like cheap plastic)

part # (these ties have “standard” ends) cost

10-NTB4	4” long	18 lb. tensile strength	10 qty	$ .89
100-NTB4	4” long	18 lb. tensile strength	100 qty	$ 4.99
10-NTB75	71/2” long	50 lb. tensile strength	10 qty	$ .99
100-NTB75	71/2” long	50 lb. tensile strength	100 qty	$ 7.99
10-NTB15	15” long	50 lb. tensile strength	10 qty	$ 2.29
100-NTB15	15” long	50 lb. tensile strength	100 qty	$18.29
10-NTBHD15	15” long	120 lb. tensile strength	10 qty	$ 4.69
100-NTBHD15	15” long	120 lb. tensile strength	100 qty	$37.50

PUSH MOUNT NYLON TIES

The PUSH MOUNT nylon tie is excellent for securing wires against sheet metal surfaces. Just drill a hole and click the arrow shaped barbed anchor in place. (1/4” or slightly smaller hole) The PUSH MOUNT also fits most of the factory holes in the sheet metal at GM, FORD, and MOPAR, where wire harness was fastened by plastic hold-downs.

SCREW MOUNT NYLON TIES

The SCREW MOUNT anchor nylon tie is also very good for fastening down wire harness. The hole at these screw mount anchors is # 10 screw size.